Automatic Transfer Switch for Generator 630A PC Manual 220V 4p Controller

• Customization: Available
• Warranty: 1 Year
• Brand: Gwiec
• Model NO.: MCQ52
• Operation: Handle Directly
• Certification: CE
• Type: Integrated automatic transfer switch
• Poles: 3P
• Output type: Triple
• Product Name: ATS
• Product: Good Quality
• Price: Negotiable
• Company Feature: Manufacturer
• Transport Package: Export Standard Packing
• Specification: MCQ52
• Trademark: GWIEC/OEM/Blank
• Origin: China Zhejiang
• Production Capacity: 10000PCS/Month
• Package Size: 45.00cm * 23.00cm * 33.00cm
• Package Gross Weight: 20.000kg

Product Description

Products introduction:

This product is PC-class automatic transfer switch/It is mainly used for AC 50/60HZ,rated voltage of 400V and below,and rated working current of 1250A in a two-neutral grounded power supply system.Switch between them to ensure the reliablity and safety of power supply.
The ATS has 'normally closed','backup closed'and 'two-way open' positions.It is widely used in automatic  conversion of common power supply and backup power supply of power supply system or automatic conversion and safety isolation of two load devices.
The product is compliant with the standard of GB/T14048.11 'low voltage switchgear and control equipment-part 6-1:Multifunctional electrical transfer switch electrical appliances'. 
Working conditions:
1.Ambient temperature:The ambient temperature is -5ºC-+40ºC,and the average temperature should not exceed +35ºC within 24 hours.
2.Atmospheric humidity:When the maxium temperature is +40ºC,the relative humidity should not exceed 50%,and the monthly maxium relative humidity is 90%.Higher relative humidity can be allowed at lower temperature.Spercial measures should be taken for the occasional condensation caused by temperature changes.
3.Installation height:The altitude of the installation site should not exceed 2000 meters.
4.Pollution level:The environmental pollution level of the installation site is level 3
5.Usage category:The use category is :AC-33B
6.Electromagnetic environment:Acclicable to environment A.The use of this product in environment B will cause harmful electromagnetic interference,in which cause the user needs to take appropriate protective measures.
Technical parameters:
Function paramter sheet

Item	Type A	Type C	Type D
Working power	AC 230V 50/60Hz
Auxilary working voltage	AC230V
Power consumption	≤10W
Working positions	Three working positions
Operation	Automatic,manual and manual remote control operation
Working mode	automatic switching and automatic recovery/automatic switching without automtic recovery
Display	Only the power supply and closing signal LED display integrated single-phase detection
Installation	All-in-one
Voltage monitoring	Single phase detection	Single phase detection	Three-phase phase loss detection
Generator control	/	√
Fire-fighting linkage control	/	√(Passive contact input)

Technical parameter sheet
 

Frame current(A)	100	160	250	400	630	1000	1250
Rated insulation voltage	690V
Rated impulse withstand voltage	8KV
Rated working current(A)	16a,20A,25A,30A,40A, 50A,60A,63A,70A, 75A,80A,100A	125a 140A 160A	200A 225A 250A	315A 350A 400A	500A 630A	800A 1000A	1250A
Rated short-circuit making capacity	8KA	17KA		26KA		50KA
Rated limited short-circuit current	120KA
Control voltage	AC230V

Product functions:

Controller code	Feature
Type A	1.Common power indication and closing status indication 2.Backup power indication and closing status indication 3.Single-phase(A-phase)phase loss detection
Type C	1.Common power indication and closing status indication 2.Backup power indication and closing status indication 3.Single-phase(A-phase)phase loss detection 4.Fire-fighting linkage,power generation start and stop function
Type D	1.Common power indication and closing status indication 2.Backup power indication and closing status indication 3.Fire protection linkage,power generation start and stop function,three-phase phase loss detection