High Quality IP65 Star Delta Starter Electrical Cabinet

Product Description

Product Description

 

QX4 series star delta starter cabinet (hereinafter referred to as the starter), for the exchange of 380 volts, 50 Hz, AC-3 in the use of power below 135KW three-phase squirrel-cage induction motor buck start, Y "automatically replaced by" *"operation, the motor has overload, phase failure and pressure protection function, widely used in compressors, fans, pumps and other facilities. This product complies with GB14048.4-2003 / IEC60947-4-1; 200. According to the views of users to expand the original product to conduct a comprehensive improvement of innovation, after its improved product features:
1, the cabinet beautiful, strong;
2, line connector room space, easy wiring;
3, built-in structure, components with a reasonable, stable performance;
 
Scope
     This product is suitable for water pump (fire, water supply, sewage treatment, oil, etc.), fan, blower, extruder, centrifuge, mixer, conveyor, ball mill, propeller, anchor winch, bilge pump, refrigeration compression Machine, rolling mill, compressor (spiral, plunger, centrifugal, turbine) and other motor starting use;
working principle:
     Start the squirrel cage asynchronous motor, the motor stator winding is first connected to the star, to be a certain rated speed, that is, after the start, in the rated time and then connected into a triangular run.
     Advantages of this product: can reduce the starting current, reduce its power grid and the same distribution network of other electrical equipment impact. The operating current at start-up is only one-third by direct start of the triangle. If the start-up current is 6-7 times, the start-up current is 2-2.3 times when the star delta starts. The starting torque is also reduced to the original triangular connection directly when starting 1/3.
 
Precautions:
     1. The stator winding of the motor is triangular connected, the rated voltage is 380V;
     2. Remove the three connectors in the motor junction box. Note that the position of the U1 V1 W1 and W2 U2 V2 is corresponding to the position of the junction box in the star delta starter cabinet.
     3. When the motor overload, the motor protector will operate to protect the shutdown, (according to the motor power, adjust the motor protector operating current) to eliminate the relevant failure and then start;
     4. Time relay conversion time in accordance with the motor running speed appropriate adjustment, generally about 5-9S;
     5. The contactor main contact is fired at the start of triangular operation (or if there is a knock). Please check the motor tap and remove the fault. Replace the contactor and start the input. (This is a man-made failure, not in the warranty list)
 
Product performance:
 
When starting the motor, the starting line of the power supply line does not exceed 3 ~ 4 times of the rated current of the motor. The starting time should be adjusted according to the size of the motor power, usually 01-99S, including the sum of several or several consecutive start times, , If the sum of the continuous start time has reached 30S, the start of the cooling time should be less than half an hour to start again, so this product only for a long time to start the use, not suitable for frequent operating conditions or overload.
  Installation and use
     When installed in the room, to ensure the following conditions to work properly:
     (1), altitude of not more than 2000 meters;
     (2), the surrounding medium temperature is not higher than +40 ºC, not less than -10 ºC;
     (3), the relative humidity of air is not greater than 85%;
     (4), the amplitude is not greater than 0.5 mm, the frequency is not greater than 600 times per minute vibration;
     (5), the inclination of the vertical plane does not exceed 5 degrees;
     (6), in a medium that is not explosive, and there is no place in the medium that is sufficient to corrode the metal and to destroy the insulated gas and conductive dust.
 
The wiring diagram of this product is shown in the product description. Before installation, use the wiring schematic to check whether the wiring is correct, according to the actual starting time of the motor to adjust the time relay action time, according to the rated motor current, adjust the motor protector operating current, and then the action test.

Related products:
GWIEC is specialized in manufacturing in contactor,circuit breakers,thermal overload relays and magnetic starters,etc.

QJX3 Star-Delta Starter Control  Cabinet mainly be applicable to the circuit of voltage 380V, AC 50/60Hz. It is used for controlling the 3-phase squirrel-close type induction motor with a power of less than 45kW on AC-3. The start up mode is automatically changed from "Y" to "△". It can protect the motor from overload, open phase, and short circuit. It is widely used in compressors, fans, water pumps and other industrial equipment.

Normal working conditions and installation conditions:

Temperature: -5°C ~ +40°C, average temperature not exceed +35°C in 24 hours.

Altitude: Do not exceed 2000m.

Air Condition: Atmospheric relative humidity can't exceed 50% at ambient air temperature of +40ºC,and the higher relative humidity may be allowed at lower temperatures. For example, when the ambient air degree is 20ºC, the relative humidity can reach 90%. Because of the occasional condensationphenomenon of the product due to the temperature changes, the user should take special protective measures.

Pollution Grade:Grade 3.

Installation category:III Class.

Mounting Condition: The inclination between the mounting plane and the vertical plane shall not exceed ±5°.

Impact shock: The product shall be installed and operated at a place without obvious shake, impact and vibration.

 

Product Selection:

Components List
Electrical Symbols	Name	Model	Quantity	Model	Quantity	Model	Quantity	Model	Quantity
		QJX3-11		QJX3-15		QJX3-18.5		QJX3-22
QF	Mini circuit breaker	AON-63 3P/D63A	1	AON-63 3P/D63A	1	AON-63 3P/D63A	1	AOM-125 3P/D100A	1
KM1	AC contactor	CJX2-2510 25A 380V	1	CJX2-2510 25A 380V	1	CJX2-3210 32A 380V	1	CJX2-4011 40A 380V	1
KM2	AC contactor	CJX2-2501 25A 380V	1	CJX2-2501 25A 380V	1	CJX2-3201 32A 380V	1	CJX2-4011 40A 380V	1
KM3	AC contactor	CJX2-1210 12A 380V	1	CJX2-1810 18A 380V	1	CJX2-2510 25A 380V	1	CJX2-3210 32A 380V	1
FM	Motor Protector	JD-5/80  1-80A 380V	1	JD-5/80 1-80A 380V	1	JD-5/80 1-80A 380V	1	JD-5/80 1-80A 380V	1
KT	Time relay	ST3P A-B 0~60s 380V	1	ST3P A-B 0~60s 380V	1	ST3P A-B 0~60s 380V	1	ST3P A-B 0~60s 380V	1
FU	Fuse protector (Optional)	RT18-32 6A	1	RT18-32 6A	1	RT18-32 6A	1	RT18-32 6A	1
HL1	Volt-ammeter	---	1	---	1	---	1	---	1
HL2	Start indicator light Yellow	AD16-22 380V	1	AD16-22 380V	1	AD16-22 380V	1	AD16-22 380V	1
HL3	Operation indicator light - Green	AD16-22 380V	1	AD16-22 380V	1	AD16-22 380V	1	AD16-22 380V	1
SB1	Start bottom - Green	LA38-11 380V	1	LA38-11 380V	1	LA38-11 380V	1	LA38-11 380V	1
SB2	Stop bottom - Red	LA38-11 380V	1	LA38-11 380V	1	LA38-11 380V	1	LA38-11 380V	1
Setting delay value		11		11		15		15

 

Components List
Electrical Symbols	Name	Model	Quantity	Model	Quantity	Model	Quantity
		QJX3-30		QJX3-37		QJX3-45
QF	Circuit breaker	AOM-125 3P/D100A	1	AOM-125 3P/D125A	1	AOM-125 3P/D125A	1
KM1	AC contactor	CJX2-5011 50A 380V	1	CJX2-6511 65A 380V	1	CJX2-9511 95A 380V	1
KM2	AC contactor	CJX2-5011 50A 380V	1	CJX2-6511 65A 380V	1	CJX2-9511 95A 380V	1
KM3	AC contactor	CJX2-4011 40A 380V	1	CJX2-5011 50A 380V	1	CJX2-6511 65A 380V	1
FM	Motor Protector	JD-5/80  1-80A 380V	1	JD-5/80 1-80A 380V	1	JD-5/200 80-200A 380V	1
KT	Time relay	ST3P A-B 0~60s 380V	1	ST3P A-B 0~60s 380V	1	ST3P A-B 0~60s 380V	1
FU	Fuse protector (Optional)	RT18-32 6A	1	RT18-32 6A	1	RT18-32 6A	1
HL1	Volt-ammeter	---	1	---	1	---	1
HL2	Start indicator light Yellow	AD16-22 380V	1	AD16-22 380V	1	AD16-22 380V	1
HL3	Operation indicator light - Green	AD16-22 380V	1	AD16-22 380V	1	AD16-22 380V	1
SB1	Start bottom - Green	LA38-11 380V	1	LA38-11 380V	1	LA38-11 380V	1
SB2	Stop bottom - Red	LA38-11 380V	1	LA38-11 380V	1	LA38-11 380V	1
Setting delay value		15		20		20

Note:Components could customized based on client's requirement.


External Dimensions(mm):

Model	A	B	C
QJX3-11	400	300	200
QJX3-15	400	300	200
QJX3-18.5	400	300	200
QJX3-22	600	400	200
QJX3-30	600	400	200
QJX3-37	600	400	200
QJX3-45	800	600	250

Company Information:

GWIEC attaches great importance of Product Quality and Safety Production Process. Our company has passed ISO Certificates. Our products are listed by CQC, CE, RoHS certificates.
GWIEC will insist her belief "Quality is Brand"to bring "Better Quality, Better Service and Better Price"to customers, our goal is to maximize your profit and bring mutual success to both of us!

Exhibition:

Certifications:
GWIEC attaches great importance of Product Quality and Safety Production Process. Our company has passed ISO Certificates. Our products are listed by CQC, CE, RoHS certificates. we supply for global factories and distributors which are experienced in filed electric products and green energy. Just like Europe, South America, Russia, Asia etc. 

Our Team:


FAQ:

1.Could I put my own logo on it?

> Sure, customers' logo can be made by laser, engraved, embossed, transfer printing etc. 

 

2.Should I pay extra for logo printing ?

> Normally usd 0.017/per color,according to the actual situation.

 

3.How about the quality ?

> Acquire the CE & SGS Certification.

> 100% QC in produce process and before package.

 

4.Could I buy 1pc sample first and small order ?

> Of course, support sample order and small order, especially for new customers under certain condition

 

5.How much for 1pc sample ?

>Some cheap ones may free for 1pcs but need to see the actual stock.

 

6.If I have my thoughts, do you have person to design according to my concept?

> Certainly,our design team is willing to do for you.

 

7.How long to make a sample?

> 2-5 days which depends on the samples' complexity.

 

8.Is the sample fee refundable or not?

> Sure, refundable once order confirmed.

 

With more than 15 years OEM experience, we can provide professional solutions for customers. 
Send your Inquiry Details in the Below, Click "Send" Now!!!